\documentclass[a4paper,12pt]{article}
\usepackage{layout}
\usepackage{fancyhdr}
\pagestyle{fancy}

\voffset -35pt
\topmargin 5pt
\headsep 20pt
\headheight 20pt
\footskip 35pt
\oddsidemargin 0pt
\textheight 675pt 
\textwidth 475pt

\renewcommand{\headwidth}{475pt}
\renewcommand{\headrulewidth}{4pt}
\renewcommand{\footrulewidth}{4pt}
\chead{\LARGE{\textbf{KURT JAMES WILLIAM ATKINSON}}}
\cfoot{\thepage~of 2}

\parskip 0pt
\partopsep -6pt

\newenvironment{Indent}
 {\begin{list}{}{}%
  \item[]\ignorespaces}
  {\end{list}}

\begin{document}
%\layout

\begin{center}
\normalsize
\begin{tabular}{llll}
\textbf{Address:}&Department of Materials,&\textbf{Nationality:}&British.\\
&Imperial College,&\textbf{Date of Birth:}&27$^{th}$ September, 1973.\\
&London.&\textbf{e-mail:}&k.atkinson@ic.ac.uk\\
&SW7 2BP&\textbf{Phone:}&+44 (0)20 7594 6802\\
\end{tabular}
\end{center}

\subsubsection*{EDUCATION}

\textbf{1998 to present:} Materials Department, Imperial College, London.

\begin{itemize}
\itemsep -2pt
\item PhD studying the passivation of surfaces using atomistic simulation
techniques with industrial support from BNFL and Corus (formerly British
Steel).
\end{itemize}

\noindent \textbf{1993 to 1998:} Materials Department, Imperial College, London.

\begin{itemize}
\itemsep -2pt 
\item M. Eng. Materials Science and Engineering 2(i).
\item Final year research project:``Atomistic Simulation of Defects in Nickel
Fluoride''
\end{itemize}

\noindent \textbf{1983 to 1992:} Giggleswick School, North Yorkshire.

\begin{itemize}
\itemsep -2pt 
\item 4 A-Levels: Mathematics (A), Physics (A), Chemistry (A), and General
studies (A).
\item 8 GCSE's: 7 A's and 1 B (including English, Mathematics, Physics, and
Chemistry).
\end{itemize}

\subsubsection*{RESPONSIBILITIES \& ACHIEVEMENTS}
\begin{itemize}
\itemsep -2pt 
\item Two years as a sub-warden at Imperial College halls of residence
(1998-2000). Responsible for pastoral welfare, safety, and social events of a 70 student
hall.
\item Best research poster at the Royal Institution's Annual Research Meeting
2000.
\item Undergraduate degree sponsored by British Steel 1993-1998.
\item 1st year representative to Materials Department Staff Student Committee
(1993-94). Represented views and opinions of peers to the department staff and
reported feedback.
\item Head of school 1991-92. Responsible for peer level discipline and organization of a
300 member school as head of a senior student team.
\item Sergeant Major in the Combined Cadets Force 1986-92. Responsible for
supervision and teaching of junior members of the Cadets during training and
competition.
\end{itemize}

\subsubsection*{IT SKILLS}
\begin{itemize}
\itemsep -2pt 
\item System administration experience on UNIX, LINUX and Windows NT operating
systems. Redesigned and implemented upgrade of research group's network, OS, and
security.
\item  Familiar with administering WEB hosting, network queueing, backups,  and security
encryption systems.
\item Programming skills in PERL, C, HTML, and FOCUS.
\item User experience with Microsoft \& Lotus Office suits, CASCADE, GULP, and
RS1.
\end{itemize}

\subsubsection*{INTERESTS}
\begin{itemize}
\itemsep -2pt 
\item Keen interest in science fiction, collecting memorabilia, and attending
conventions.
\item Study the practical and philosophical aspects of the Martial Arts,
especially Aikido.
\item PERL scripting for fun and practical use to solve all of life's little
problems.
\end{itemize}

\newpage
\subsubsection*{WORK EXPERIENCE}

\noindent
\textbf{Defense Clothing and Textiles Agency (MOD)}, Colchester (Summer 1998).

\begin{Indent}
Reviewed research into metallic personal protection materials. Assisted in the
organizing and running of the Personal Armour System Symposium (PASS '98);
responsible for IT and multimedia systems. Also employed to run IT systems
during PASS 2000.
\end{Indent}

\noindent
\textbf{British Steel Research, Surface Science Section}, Swinden (April 1998 - May 1998).

\begin{Indent}
Used SNMS depth profiling and XPS surface analysis techniques to study the
surface chemistry of steels coatings as part of continuing process development.
\end{Indent}

\noindent
\textbf{British Steel Project Logistics}, Teesside (Summer 1997).

\begin{Indent}
Combined local operations knowledge with process data to compile a ``Time
Compression Study'' of the supply chain of a coil plate mill.
\end{Indent}

\noindent
\textbf{British Steel Research, Casting \& Re-heating Section}, Teesside (Summer 1996).

\begin{Indent}
Analysis of process data to investigate possible causes of longitudinal face
cracking 12" continually cast steel slab.
\end{Indent}

\noindent
\textbf{British Steel Technical, Continuous Casting Plant}, Teesside (April 1996 - July 1996).

\begin{Indent}
Recording and analysis of quality control data and links to process
abnormalities affecting product. Work involved interrogation of process control
databases and off-line data analysis to prove interrelationships between
process parameters and operating theories.
\end{Indent}

\noindent
\textbf{British Steel Technical, Metallurgical Services}, Teesside (October 1995 - March 1996).

\begin{Indent}
Reporting on evaluation of new products, analysis of complaints, and
investigation into failures. Lab work involved ultrasonic and thermal
non-destructive evaluation, hardness testing, light microscopy, chemical
analysis, and sulphur printing.
\end{Indent}

\noindent
\textbf{British Steel Technical, Coke Ovens}, Teesside (Summer 1995).

\begin{Indent}
Development of a statistical model for coke oven fuel consumption. Creation of
an intuitive PC based monthly reporting and trend analysis system to present
quality and environmental performance data for distribution across the company.
\end{Indent}

\noindent
\textbf{British Steel Technical, Universal Beam Mill}, Teesside (Summer 1994).

\begin{Indent}
Product trial and investigation work targeted towards development of new
processing routes for hot rolled beams. Compilation of process capability data
as part of the plant's application for Japanese market entry permission.
\end{Indent}

\noindent
\textbf{Brunner Mond \& Co. Ltd.,}, Cheshire (June 1992 - August 1993)

\begin{Indent}
Placed as part of the "Year in Industry" program. Working in ``Engineering
Standards and Design Group'' which involved design, installation, and
commissioning control system solutions for plant operations.
\end{Indent}

\subsubsection*{REFERENCES}
\begin{Indent}
Please contact me directly for contact details of referees.
\end{Indent}

\end{document}